Product Tables

 

  Home > Metric Bearings > 40mm inner diameter Bearings >

7308 Nachi Angular Contact Bearing C3 Japan 40x90x23 Bearings
7308 Nachi Angular Contact Bearing C3 Japan 40x90x23
7308 Nachi Angular Contact Bearing C3 Japan 40x90x23
  
Our Price: $108.88
Inner Diameter: Item: 7308 Angular Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Steel Cage
Model: Dimensions: 40mm x 90mm x 23mm/Metric
Standard: ID (inner diameter)/Bore: 40mm


Product Code: 7308-NACHI-C3-JAPAN-40X90X23

Description
 

7308 Nachi Angular Ball Bearing 40 Contact Angle Steel Cage 40mm x 90mm x 23mm Made in Japan 7308 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 40mm, outer diameter is 90mm and width is 23mm.

  • Item: 7308 Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 40mm x 90mm x 23mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter D1): 90mm
  • Width/Height/thickness: 23mm
  • Size: 40 x 90 x 23 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 49,000 N
  • Static load rating Cor: 33,000 N
  • Limiting Speed:
  • Grease Lubrication: 7,000 RPM
  • Oil Lubrication: 9,200 RPM
  • Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7308 Nachi Angular Contact Bearing C3 Japan 40x90x23 Bearings

    Kit10032

    		•

    Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Metric Bearings > 40mm inner diameter Bearings
    Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
    Bearing By Types > Angular Contact Ball Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand
    Bearing By Types
    Metric Bearings