|
|
|
|
|
Conveyor Roller Stamped Flanged Bearing 12x35.3 Conveyor Bearings
|
|
35.3mm Conveyor Bearings for Rollers D1DdHBLoading(lb) 37.7mm35.3mm12mm15.5mm11.5mm572 One slow speed unground flanged ball bearings for use with the conveyor rollers (pipes/cylinders), inner diameter bore=12mm, outer diameter=35.3mm, the mechanical drawing and the table above shows all the dimensions, the table shows also the load capacity, good luck building your conveyor system. Item: unground flanged ball bearings Inner diameter: 12mm Fitting diameter (outer surface): 35.3mm Flange Diameter (outer edge): 37.7mmConveyor Roller Stamped Flanged Bearing 12x35.3 Conveyor BearingsKit7933
|
|
|
|
|
|
|
|
Conveyor Roller Stamped Steel Flanged Bearing 8x23.6 Bearings
|
|
23.6mm Conveyor Bearings for Rollers D1DdHBLoading(lb) 25.1mm23.6mm8mm14.5mm9.5mm330 One slow speed unground flanged ball bearings for use with the conveyor rollers (pipes/cylinders), inner diameter bore=8mm, outer diameter=23.6mm, the mechanical drawing and the table above shows all the dimensions, the table shows also the load capacity, good luck building your conveyor system. Item: unground flanged ball bearings Inner diameter: 8mm Fitting diameter (outer surface): 23.6mm Flange Diameter (outer edge): 25.1mmConveyor Roller Stamped Steel Flanged Bearing 8x23.6 BearingsKit7931
|
|
|
|
|
|
|
|
F688-2RS Flanged Unground Sealed Bearing 8x16x5 Miniature Bearings
|
|
F688-2RS Flanged Unground Sealed Ball Bearing 8mm x 16mm x 5mm One Bearing F688-2RS Flanged Unground Sealed Ball Bearing, each F688-2RS bearing is rubber sealed from both sides to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease, inner diameter is 8mm, outer diameter is 16mm and width is 5mm. Item: F688-2RS Flanged Unground Ball Bearing Type: Deep Groove Ball Bearing Shields: 2 Rubber Seal Size: 8mm x 16mm x 5mm Inner Diameter: 8mm Outer Diameter: 16mm Width: 5mm Quantity: one Bearing Dynamic load rating Cr: 1,600 N Static load rating Cor: 710 N Limiting Speed: Grease Lubrication: 28,000 RPM Quantity: One BearingF688-2RS Flanged Unground Sealed Bearing 8x16x5 Miniature BearingsKit14194
|
|
|
|
|
|
|
|
Conveyor Roller Stamped Flanged Bearing 12x47.6 Conveyor Bearings
|
|
47.6mm Conveyor Bearings for Rollers D1DdHBLoading(lb) 50.7mm47.6mm12mm18mm13mm580 One slow speed unground flanged ball bearings for use with the conveyor rollers (pipes/cylinders), inner diameter bore=12mm, outer diameter=47.6mm, the mechanical drawing and the table above shows all the dimensions, the table shows also the load capacity, good luck building your conveyor system. Item: unground flanged ball bearings Inner diameter: 12mm Fitting diameter (outer surface): 47.6mm Flange Diameter (outer edge): 50.7mmConveyor Roller Stamped Flanged Bearing 12x47.6 Conveyor BearingsKit7934
|
|
|
|
|
|
|
|
Conveyor Roller Stamped Flanged Bearing 12x56.1 Conveyor Bearings
|
(1)
|
|
|
56.1mm Conveyor Bearings for Rollers D1DdHBLoading(lb) 59.3mm56.1mm12mm12.6mm15.2mm580 One slow speed unground flanged ball bearings for use with the conveyor rollers (pipes/cylinders), inner diameter bore=12mm, outer diameter=56.1mm, the mechanical drawing and the table above shows all the dimensions, the table shows also the load capacity, good luck building your conveyor system. Item: unground flanged ball bearings Inner diameter: 12mm Fitting diameter (outer surface): 56.1mm Flange Diameter (outer edge): 59.3mmConveyor Roller Stamped Flanged Bearing 12x56.1 Conveyor BearingsKit7935
|
|
|
|
|
|
|
|
Stamped Steel Flanged Wheel Bearing 7/16 x 1 1/8 inch Ball Bearings
|
|
Unground Flanged Wheel Bearing 7/16" x 1 1/8" x 7/16" inch One Bearing 7/16" x 1 1/8" x 7/16" Unground Flanged Bearing, popular size that could be used in many Unground applications, Bearing is made of Steel. Item: 7/16" x 1 1/8" x 7/16" Unground Flanged Wheel Bearing Type: Flanged wheel Bearing ID (inner diameter)/Bore: 7/16" inch OD (outer diameter): 1 1/8" inch Width/Height/thickness: 7/16" inch Quantity: One BearingStamped Steel Flanged Wheel Bearing 7/16 x 1 1/8 inch Ball BearingsKit13876
|
|
|
|
|
|
|
|
Stamped Steel Flanged Wheel Bearing 1/2 x 1 3/8 inch Ball Bearings
|
|
Unground Flanged Wheel Bearing 1/2" x 1 3/8" x 31/64" inch One Bearing 1/2" x 1 3/8" x 31/64" Unground Flanged Bearing, popular size that could be used in many Unground applications, Bearing is made of Steel. Item: 1/2" x 1 3/8" x 31/64" Unground Flanged Wheel Bearing Type: Flanged wheel Bearing ID (inner diameter)/Bore: 1/2" inch OD (outer diameter): 1 3/8" inch Width/Height/thickness: 31/64" inch Quantity: One BearingStamped Steel Flanged Wheel Bearing 1/2 x 1 3/8 inch Ball BearingsKit13877
|
|
|
|
|
|
|
|
Stamped Steel Flanged Wheel Bearing 3/4 x 1 3/8 inch Ball Bearings
|
|
Unground Flanged Wheel Bearing 3/4" x 1 3/8" x 31/64" inch One Bearing One Unground Flanged Bearing, popular size that could be used in many Unground applications, Bearing is made of Steel. Item: 3/4" x 1 3/8" x 31/64" Unground Flanged Wheel Bearing Type: Flanged wheel Bearing ID (inner diameter)/Bore: 3/4" inch OD (outer diameter): 1 3/8" inch Width/Height/thickness: 31/64" inch Quantity: One BearingStamped Steel Flanged Wheel Bearing 3/4 x 1 3/8 inch Ball BearingsKit13879
|
|
|
|
|
|
|
|
Stamped Steel Flanged Wheel Bearing 5/8 x 1 3/8 inch Ball Bearings
|
|
Unground Flanged Wheel Bearing 5/8" x 1 3/8" x 31/64" inch One Bearing 5/8" x 1 3/8" x 31/64" Unground Flanged Bearing, popular size that could be used in many Unground applications, Bearing is made of Steel. Item: 5/8" x 1 3/8" x 31/64" Unground Flanged Wheel Bearing Type: Flanged wheel Bearing ID (inner diameter)/Bore: 5/8" inch OD (outer diameter): 1 3/8" inch Width/Height/thickness: 31/64" inch Quantity: One BearingStamped Steel Flanged Wheel Bearing 5/8 x 1 3/8 inch Ball BearingsKit13878
|
|
|
|
|
|
|
|
Unground Flanged Wheel Bearing 1/2 x 1 1/8 inch Ball Bearings
|
|
Unground Flanged Wheel Bearing 1/2" x 1 1/8" x 3/8" inch One Bearing 1/2" x 1 1/8" x 3/8" Unground Flanged Bearing, popular size that could be used in many Unground applications, Bearing is made of Steel. Item: 1/2" x 1 1/8" x 3/8" Unground Flanged Wheel Bearing Type: Flanged wheel Bearing ID (inner diameter)/Bore: 1/2" inch OD (outer diameter): 1 1/8" inch Width/Height/thickness: 3/8" inch Quantity: One BearingUnground Flanged Wheel Bearing 1/2 x 1 1/8 inch Ball BearingsKit13875
|
|
|