Product Tables

 

  Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan Bearings
7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan
7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan
  
Our Price: $207.54
Inner Diameter: Item: 7200CYP4 Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Polyamide resin cage
Model: Quality: ABEC-7 (P4 quality)
Standard: Dimensions: 10mm x 30mm x 9mm/Metric


Product Code: 7200CYP4-NACHI-10309-JAPAN

Description
 

High Precision Ball Bearing 7200CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 10mm x 30mm x 9mm Made in Japan 7200CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 10mm, outer diameter is 30mm and width is 9mm.

  • Item: 7200CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 10mm x 30mm x 9mm/Metric
  • ID (inner diameter)/Bore: 10mm
  • OD (outer diameter): 30mm
  • Width/Height/thickness: 9mm
  • Size: 10 x 30 x 9 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,950 N
  • Static load rating Cor: 3,300 N
  • Limiting Speed:
  • Grease Lubrication: 40,000 RPM
  • Oil Lubrication: 55,000 RPM
  • Made in Japan Dimensions d D B r r1 a 10mm 30mm 9mm 0.6mm 0.3mm -2.2mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan Bearings

    Kit10846

    		•

    Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
    Bearing By Types > Angular Contact Ball Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi ABEC-7 Precision Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing
    Metric Miniature Bearings > 10mm inner diameter Bearings
    Bearing By Types > Bearings by Brand
    Bearing By Types
    Metric Miniature Bearings