 |
 |
 |
|
NU210MY Nachi Cylindrical Roller Bearing Bronze Cage 50mm x 90mm x 20mm Made in Japan NU210MY Nachi Cylindrical Roller Bearing, Bronze Cage, Made in Japan, the NU210MY inner diameter is 50mm, the NU210MY outer diameter is 90mm, NU210MY width is 20mm. Item: NU210MY Cylindrical Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Bronze Cage Dimensions: 50mm x 90mm x 20mm/Metric ID (inner diameter)/Bore: 50mm OD (outer diameter): 90mm Width/Height/thickness: 20mm Size: 50 x 90 x 20 mm Quantity: One Bearing Dynamic load rating Cr: 48,000 N Static load rating Cor: 51,000 N Limiting Speed: Grease Lubrication: 7,100 RPM Oil Lubrication: 8,500 RPM Made in Japan Nachi Cylindrical Roller Bearings Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.NU210MY Nachi Cylindrical Roller Bearing Japan 50x90x20 BearingsKit10288
|
|
|
 |
|
 |
|
