|
|
|
|
NJ307MY Nachi Cylindrical Roller Bearing 35mm x 80mm x 21mm Bronze Cage Made in Japan NJ307MY Nachi Cylindrical Roller Bearings, Bronze Cage, Made in Japan, the NJ307MY inner diameter is 35mm, the NJ307MY outer diameter is 80mm, NJ307MY width is 21mm. Item: NJ307MY Nachi Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Bronze Cage Dimensions: 35mm x 80mm x 21mm/Metric Inner Diameter: 35mm Outer Diameter: 80mm Width: 21mm Size: 35 x 80 x 21 mm Dynamic load rating Cr: 49,500 N Static load rating Cor: 47,000 N Limiting Speed: Grease Lubrication: 8,000 RPM Oil Lubrication: 9,500 RPM Quantity: One Bearing Made in Japan Nachi Cylindrical Roller Bearings Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.NJ307MY Nachi Cylindrical Roller Bearing 35x80x21 Japan BearingsKit10410
|
|
|
|
|
|
|