Product Tables

 

  Home > Metric Bearings > Bearings with Large inner diameter >

BNH011TU Nachi Angular Contact Spindle Bearing 55x90x18 ABEC 7
BNH011TU Nachi Angular Contact Spindle 55x90x18 ABEC 7
BNH011TU Nachi Angular Contact Spindle 55x90x18 ABEC 7
  
Our Price: $494.74
Inner Diameter: Item: BNH011TU Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Spindle Ball Bearing
Width Diameter: Cage: Phenolic cage
Model: Quality: ABEC-7
Standard: Dimensions: 55mm x 90mm x 18mm/Metric


Product Code: BNH011TU-NACHI-SPINDLE-559018

Description
 

High Precision Ball Bearing BNH011TU Nachi High Speed Angular Spindle Ball Bearing 15 degrees Contact Angle Abec-7 55mm x 90mm x 18mm Made in Japan BNH011TU Nachi High Speed Angular Spindle Bearing, Ball Bearing is Super precision Angular with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 quality and made in Japan.

  • Item: BNH011TU Nachi Ball Bearing
  • Type: Nachi Angular Spindle Ball Bearing
  • Cage: Phenolic cage
  • Quality: ABEC-7
  • Dimensions: 55mm x 90mm x 18mm/Metric
  • ID (inner diameter)/Bore: 55mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 18mm
  • Size: 55 x 90 x 18 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 20,000 N
  • Static load rating Cor: 20,100 N
  • Limiting Speed:
  • Grease Lubrication: 17,000 RPM
  • Oil Lubrication: 24,100 RPM
  • Made in Japan Dimensions d D B r r1 55mm 90mm 18mm 1mm 0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    BNH011TU Nachi Angular Contact Spindle Bearing 55x90x18 ABEC 7

    Kit10936

    		•

    Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Metric Bearings > Bearings with Large inner diameter
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi ABEC-7 High Speed Spindle Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi ABEC-7 Precision Bearings
    Bearing By Types > Angular Contact Ball Bearings
    Bearing By Types > Bearings by Brand
    Bearing By Types
    Metric Bearings