Product Tables

 

  Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7312BMU Nachi Angular Contact Bearing Brass Cage C3 60x130x31 Bearings
7312BMU Nachi Angular Contact Brass Cage C3 60x130x31
7312BMU Nachi Angular Contact Brass Cage C3 60x130x31
  
Our Price: $230.74
Inner Diameter: Item: 7312BMU Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Radial Clearance: C3
Model: Cage: Brass Cage
Standard: Dimensions: 60mm x 130mm x 31mm/Metric


Product Code: 7312BMU-NACHI-BRASS-C3-6013031

Description
 

7312BMU Nachi Angular Ball Bearing 40 Contact Angle Brass Cage & Flush Ground 60mm x 130mm x 31mm Made in Japan 7312BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 60mm, outer diameter is 130mm and width is 31mm.

  • Item: 7312BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Radial Clearance: C3
  • Cage: Brass Cage
  • Dimensions: 60mm x 130mm x 31mm/Metric
  • ID (inner diameter)/Bore: 60mm
  • OD (outer diameter): 130mm
  • Width/Height/thickness: 31mm
  • Size: 60 x 130 x 31 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 92,500 N
  • Static load rating Cor: 67,500 N
  • Limiting Speed:
  • Grease Lubrication: 4,300 RPM
  • Oil Lubrication: 5,500 RPM
  • Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7312BMU Nachi Angular Contact Bearing Brass Cage C3 60x130x31 Bearings

    Kit9999

    		•

    Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
    Bearing By Types > Angular Contact Ball Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
    Metric Bearings > Bearings with Large inner diameter
    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand
    Bearing By Types
    Metric Bearings